do88 Charge Pipe Kit for the MQB 2.0T EA888 Gen3
This kit is for you with significant horsepower goals that want to upgrade to the absolute best! Our pressure pipe has considerably better airflow than the stock pipe. This has been verified in several tests, both in car and in our own SuperFlow SF-1020 flow bench.
Advantages with do88 pressure pipes (OEM pipes):
- Air flow at 0,1bar/1,45psi pressure drop: 364CFM (280CFM), do88 30% higher! See diagram below.
- Designed to handle high pressure and temperatures!
- The pipe has one methanol injection connection (1/8 -27 NPT). The pipe is delivered with blanking plug in this connection.
- Compatible with 6-Speed Manual, 6-Speed DSG and 7-Speed DSG Models
The pressure pipe is manufactured in 63mm (2,5”) mandrel bent seamless aluminium pipe.
Custom made high quality silicone hose with 4 layers of polyester/aramid reinforcement. These hose can handle very high temperature and pressure!
Always remember that the OEM intercooler pipes and hoses were designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM pipes and hoses don’t have the performance you need.
So only after engine software tune do88 pressure pipes will give a performance increase over the OEM pipes!
Compatible with the following Vechicles with the 1.8T/2.0T EA888 Gen3 Engines
- VW Golf Mk7 GTI
- VW Golf Mk7 GTI Clubsport
- VW Golf Mk7 'R'
- VW Passat B8
- VW Tiguan Mk2
- VW Arteon (upto 2020)
- Audi A3 8V
- Audi S3 8V
- Audi TT 8S
- Audi TTS 8S
- SEAT Leon Mk3
- SEAT Ateca Mk1
- Cupra Ateca Mk1
- Skoda Octavia vRS Mk3
- Skoda Superb Mk3
---> Click Here to download Charge Pipe Kit Installation Instructions <---
do88 charge pipes comes with all hardware necessary for installation.
